Your new patio looked perfect in March. By September it had a hairline crack running corner to corner, and a gray film where the afternoon storms pool. Florida weather is hard on concrete, and in Brevard County it gets tested every single day.
The good news is that most weather damage starts with decisions made before and during the pour. Here is what our heat, rain, soil and storms actually do to concrete, and what we do about it on every job in Palm Bay and Melbourne.
Concrete does not dry. It cures through a chemical reaction with water, and that reaction needs time. On a July afternoon, a slab in direct sun can lose surface moisture faster than the mix can use it. The top sets before the inside, and that is when shrinkage cracks and a weak, dusty surface show up.
That is why our crews start early. Pouring in the cooler morning hours gives the finishers time to do their work right. We also keep fresh concrete damp while it cures, using water, curing compound or coverings depending on the job. It is not glamorous, but those first few days decide how the slab holds up for the long haul.
Summer in Palm Bay means a storm almost every afternoon. A hard rain on concrete that has not set can wash out the cream on the surface, pit the finish and throw off the water balance in the mix. Once the surface has set, rain actually helps the cure.
We watch the radar, plan pours around the storm pattern and keep plastic on the truck. When the weather turns, the crew protects the work first. One of our reviewers mentioned we finished their driveway right through a rainy stretch, and that only works with a plan.
Most of Brevard sits on sand. Sand drains well, but it also shifts and washes out when water runs under a slab. Low spots, sunken corners and cracks along one edge usually trace back to the base, not the concrete itself.
Before we pour, we grade and compact the base, and we pay attention to where roof runoff and yard water will go. If water has nowhere to drain, it will find its way under your slab. Sometimes the right answer is a small drainage fix next to the project, like a swale, a culvert pipe or a mitered end.
Storm season brings flooding, saturated ground and debris trucks rolling over driveways that were never built for them. Concrete that was poured thin or over a soft base is the first to break when the ground gets soaked.
For driveways and slabs that will carry real weight, we talk through thickness, reinforcement and joint spacing up front. After a big storm, take a walk around your concrete. New cracks, lifted edges or hollow-sounding spots are worth a look before the next one. Our concrete repair team can tell you whether it is cosmetic or something deeper.
A few simple things make a big difference in our climate.
If you are planning a new driveway or patio, these details belong in the conversation from day one. Ask any contractor how they handle heat, rain and base prep. The answer tells you a lot.
Concrete behaves differently here than it does up north. Freeze and thaw is not our problem. Heat, humidity, sand and storm water are. Ashley and Adam Beyer run Green Hammer as a family business right here in Palm Bay, and our crews pour in these conditions every week. We would rather explain the why than leave you guessing.
Early morning is usually best. Cooler temperatures give the crew time to place and finish the concrete before the heat speeds up the set.
Rain on fresh concrete can damage the surface, so we cover it if a storm moves in. Once the surface has set, light rain is not a problem and can even help the cure.
Sealing exposed slabs helps slow down stains, mildew and water absorption in our humid climate. We can tell you which sealer fits your surface and how often to reapply it.
Seeing cracks after a hot summer or a stormy season? Let us take a look and give you a straight answer. Call or text Green Hammer Concrete at (321) 399-7323 or request your free estimate online. Solid work. Honest results. Bringing your vision to life.